About the Course

A vital part in so many jobs today particularly engineering is the collation and sorting of data. Often raw data must be presented in suitable formats to communicate and summarise the key points. Microsoft Excel is a very power tool allowing the user to use spreadsheets and then use a menu of powerful commands to manipulate the data. On successful completion of the course you will able to set up spreadsheets, use an array of functions and produce graphs. The power of excel is immense and the capacity to manage large amounts of data will be of value to anyone working in many different fields.

Course Content

Even with little or no experience of using excel you will quickly learn starting with simple spreadsheets how this software can help you in your work place or at home. This course will equip you with the understanding to sue excel to maximum effect.

Success Story

All engineers should be confident in the use of excel.

Entry Requirements

No formal entry qualifications other than basic competence in using computers

Learning Style

The learning process will be very much hands on with the tutor available to support you at all time.

Equipment Requirements

All equipment supplied

Assessment

There are no formal tests but you will receive a college certificate to evidence what has been learnt on the course.

Progression

To develop your career further you might consider the Subsidiary Diploma in Engineering

Enrolment Instructions

Enrolment follows a short informal discussion with the tutor to checks needs and set objectives for the course.

Related Tags

About the Course

The course provides a basic introduction to the safe use and operation of engineering work shop equipment such as pedestal drills, lathes and milling machines.

Course Content

The course will cover the selection of tooling, correct setting up the equipment, selecting speeds and feeds and the manufacture of simple components to demonstrate competence.

Entry Requirements

There are no formal entry qualifications other than a willingness to learn how to use equipment correctly and safely. 

Learning Style

Small groups, formal instruction followed by hands on practice.

Equipment Requirements

Overall and safety shoes must be provided by any student attending the course.

Assessment

No formal assessment but a college certificate will be issued on successful completion of the programme.

Enrolment Instructions

Please apply on line or in person at the college.  The Curriculum Team will require a general talk with you to ensure this is an appropriate course before you enrol, so when you complete your application please ensure you leave daytime contact details.

The course will require a minimum number of students to be viable and is currently in the evening, however delivery can be flexible, either evenings of days to suit applicants.

Related Tags

About the Course

The Work group PDM application is Project Data Management software that runs inside the SolidWorks® environment or as a standalone application inside SolidWorks Explorer. Work group PDM controls projects with procedures for Check In and Check Out files, revision control, and other administration tasks.

This course is designed for Engineers/Designers and System Administrators.

Course Content

During this introduction course we will look at creating storage areas (Vaults), creating Users, Review and practice Check In and Check Out procedures along with using powerful administration tools such as – Rename, Find, Where Used. The course looks at Project Data Management from a user’s perspective and as a basic System Administrator.

Entry Requirements

Basic knowledge of SolidWorks with some design experience. No prior knowledge of Data Managements systems is required but a limited knowledge of Windows™ operating systems would be helpful. (No prior knowledge of Data Managements systems is required.)

Enrolment Instructions

In order to confirm your place on the course, you can book online via the Business Training Calendar or you will need to complete a Reservation Form and return it to the Employer Engagement Team.  Please ensure you read a copy of the terms and conditions for bookings and that we are informed of any special requirements.  

Related Tags

About the Course

The course will use AutoCAD software to introduce students to basic CAD drawing, leading to the more advanced levels.  The course is also suitable for those wishing to gain the C&G 4353 2D qualification in computer-aided design

Course Content

Topics covered include: · Accessing the software· Creating and using blocks· Creating and using prototype drawings· Drawing lines, arcs and circles · Use of layers, pictorial views, text, hatching and dimensioning.· Formatting system variables, text and dimension styles· Using different drawing spaces, and editing existing drawings.

Entry Requirements

Basic keyboard skills and a technical drawing background.

Assessment

This course is not a qualification however there is an opportunity for those wishing to gain C&G 4353 in 2D computer-aided design.  There will be 4 assessments to be carried out, 3 practical and 1 written.  All assessments are written by City and Guilds, but are internally set and marked.

Additional Information

Attendance - part time, evenings. College certificate on completion Please note this is not a Government sponsored course. You will, therefore, be required to pay all fees personally.

Because of the limited number of machine maximum group size is 12 so early enrolment is advised.

Enrolment Instructions

No interview is required to enrol onto this course.

Related Tags

About the Course

This course is for new learners and those with some experience of welding to learn the techniques and gain an understanding of the skill and the processes. 

Course Content

Within this course students will choose to study one of the following welding processes:

• Mig/Mag
• Tig/Tag
• Metal Arc

If you wish to cover another welding process i.e. Gas Welding, please discuss this with the tutor.  Please note this is not a qualification.

Entry Requirements

No formal welding qualifications are required for this course, but a good standard of English  and Maths is required (Level 1 ESOL, Literacy and numeracy or GCSE).

Learning Style

Practical based - students will be able to complete a small project

Equipment Requirements

Students must provide their own personal safety wear - boots and overalls.  Welding safety wear is provided by the College.

Assessment

No formal assessments - this is not a qualification, students will be able to complete a small project.

Progression

Progression to PEO in Fabrication and Welding or alternatively why not try out our other Basic introduction courses in Bricklaying, Carpentry or Painting and Decorating.  Please ask the Information and Advice team for further information.

Additional Information

There is limited space in the workshop for Health and Safety reasons - Maximum of 15 students, we recommend early enrolment to avoid disappointment.

Enrolment Instructions

An interview is not required for this course, but if you wish to discuss it further with the Fabrication and Welding Team, contact the Information and Advice Team on (023) 8048 4848 to arrange this.

Please note that this is not a Government sponsored course, you will therefore be required to pay all your fees personally. 

Related Tags

About the Course

This course provides you with the opportunity to build on the skills, knowledge and understanding gained at level 1 and develop a better understanding of the personal skills you will need to embark on a successful career in engineering.

The engineering sector continues to suffer from a skills gap and needs to keep up with rapidly developing technologies. New entrants to the engineering sector need to build the underpinning knowledge and specific skills needed to meet the needs of modern engineering industries.

The BTEC Firsts in Engineering have been designed with flexible qualification structures and a wide range of units to provide opportunities for learners who intend progressing into technician roles as well as for those who are not yet based in industry and wish to gain an understanding of engineering
 

Course Content

The course will cover core units in working with others and communications as well as developing mathematics and science skills vital in all areas of engineering. The course has clean pathways to develop skills necessary for those working in the manufacturing, machining, welding and fabrication industries.

Success Story

Many students who have successfully completed this course have either gone on to secure employment through the apprenticeship scheme or have progressed on to the level 3 BTEC National award in Engineering

Entry Requirements

Minimum 4 GCSE’s D-E’s, including English and Maths. Students who have studied at Level 1 / City Horizons will need to have achieved a minimum of a Level 1 Diploma or a Level 1 Certificate alongside a Work Skills Qualification and completed functional skills in English and Maths at Level 1. City Horizons students will require 5 “green lights” in their final student review. Individual cases where the minimum grade is not achieved may still gain access via an entry interview and skills test.

Learning Style

Teaching and learning will take place in a modern teaching environment with appropriate workshop facilities. While a practical approach to the course will be encouraged and used, some subjects require a more academic approach to deliver the underpinning knowledge

Equipment Requirements

Students will be required to provide their own safety shoes and overalls when working in the workshop. Students will also be required to provide their own stationery necessary to complete the course.

All other equipment and materials will be provided

Assessment

The course is based on continual assessment, assignments being completed by the student throughout the course.  Students are supported throughout the assessment process to help them achieve the different grading levels of either pass, merit or distinction.

Progression

By successfully undertaking the BTEC First Diploma in Engineering you should acquire increased self reliance and an awareness of the vocational skills needed in the engineering sector. This will give you a strong starting point for entering the workplace in an appropriate support role, following additional training and encouragement.

Having achieved the BTEC First Diploma in Engineering, it may be possible to further your personal development and employ ability by undertaking another BTEC qualification in a vocational area that interests you. Alternatively, you could progress to a qualification at Level 3, such as a BTEC National Award in Engineering, or you could work towards an NVQ (National Vocational Qualification) in a specific area of skills, especially if you would be working in a related area

Enrolment Instructions

If you would like any further information about this course or would like to arrange an interview, please contact student services on 023 8057 7400.

Related Tags

About the Course

The PEO performing Engineering Operations is a long established programme that equips learners both part time and full time ( Under 24 ) with the skills, knowledge and underpinning knowledge to make a safe and productive start to their engineering career. The course provides an introduction to health and safety, communications and working with others, plus specific pathways to suit various engineering disciplines.

Course Content

The course consists of three core units: Health and Safety, Communications and Working with Others combined with vocational  pathways.

There are pathways in Mechanical, Fabrication and Welding, Electrical and Marine. City College attempts to deliver the programme holistically rather than unit by unit to provide a more realistic working experience. The learners will be able to work in a practical environment gaining appropriate skills in a workshops that are realistic to those found within industry.

Success Story

The programme is mainly designed for work based learners who attend college on a day release basis whilst working for an employer for the resat of the week. However, learners not in employment have found the course an excellent means to gain employment

Entry Requirements

There are no formal entry requirements but learners are expected to have a good grasp of literacy and numeracy with the ability to work with others in a safe and constructive manner.

Learning Style

The course will include some classroom teaching, but in the main will involve practical hands on activities to develop the appropriate skills necessary to be successful in the work place.

Equipment Requirements

Suitable personal protective equipment will be required such as shoes and overalls.

Assessment

The core units are assessed via three on-line computer based multiple choice exams. The pathways units are initially assessed via completing practical activities which are then fully assessed via a completed portfolio of evidence which the learner completes.

Progression

As many learners will be apprentices, they will progress to the next level- however, non employed learners can apply for suitable employment in their chosen vocational area.

Enrolment Instructions

Apply on line. A representative of the college will then contact you for further details, alternatively call in and speak to a tutor.

Related Tags

About the Course

Engineering to day offers many opportunities in fields such as mechanical, electrical, electronic, marine and aeronautical for people looking to progress their career or gain employment in one of these sectors

This course will be ideally suited to you even if you have not been in education for some time, provided you have the motivation and desire to learn and update your engineering knowledge.

Course Content

The BTEC certificate is a 3 unit qualification designed to provide the underpinning skills covering health and safety, mathematics and either mechanical or electrical principles. It will allow suitable candidates the opportunity to develop analytical and problem solving skills which employers are looking for when considering recruiting people in to a range of technical positions.

Success Story

This course would be an excellent first start for someone looking to gain employment in engineering but also for some one looking to progress within their organisation.

If you have consider the HNC diploma program but are not sure if you ready or equipped with the right skills then this course can help you get on track

Entry Requirements

Ideally, suitable candidates should possess a good level of literacy and numeracy preferably with GCSE grade C in mathematics and English. However, a lack of formal qualifications is no bar to entry to the course provided suitable candidates can demonstrate an appropriate level of literacy and Numeracy skills.

Learning Style

There will be a combination classroom teaching supported by tutor led sessions to reinforce learning.

Equipment Requirements

Learners will be expected to provide calculators, paper pens etc.

Assessment

Assessment is through written assignments but also short timed tests. Tutors well understand the challenges faced by learners who have been away from education for some time and will be well supported.

Progression

Successful candidates can progress on to the subsidiary diploma and in exceptional circumstances may progress on to the HNC programme

Following successful completion of this programme there are a range of mechanical and electrical units that students may be able to study provided there are sufficient numbers of students enrolling

Enrolment Instructions

Apply on line or in person at the college, a short informal interview will be required

Related Tags

About the Course

This is a new technical one year programme covering a wide range of engineering related topics and would be suitable for school leavers, apprentices with suitable qualification, or mature learners who want to gain a qualification to enter or further their career in engineering.  This Subsidiary Diploma programme can be undertaken on a Full Time or Part Time basis. 

The Full Time programme leads onto the new National Diploma and /or Extended National Diploma in Engineering meeting the requirements for University entry.

The Part Time programme leads into a second year of the National Diploma in either Electrical or Mechanical Engineering. This programme is also for students wishing to study at HNC/HND level who have not studied on an engineering course at level 3 for some years.

Course Content

The BTEC Subsidiary Diploma in Engineering is a level 3 programme equivalent to one 'A' level and combines both academic and practical study covering a wide range of units.  The Subsidiary Diploma consists of six units, some of which are: communications, health and safety and mathematics.  Students elect whether to study on the following pathways;

Mechanical units studied are: 

• Mechanical principles

• Engineering drawing

• Engineering materials

Electrical Units studied are:

• Electrical principles

• Electronic principles

• Electrical applications

Other pathways including welding and fabrication and possibly marine may be offered subject to further discussion with the college

Success Story

Students gain a recognised qualification after one year. Some students have been fast tracked to the HNC programme providing they have suitable experience in engineering and previous qualifications.

Entry Requirements

Minimum 6 A-C’s, including English and Maths at grade B. Students who have studied at Level 2 will need to have achieved a minimum of a Merit and completed functional skills in English and Maths at Level 1 and have completed or be working towards Functional Skills in English and Maths at Level 2, a tutor reference from the Level 2 course may be required. Adult learners who have not been in education recently can gain entry via interview and demonstration of relevant work experience and or equivalent qualifications. Individual cases where the minimum grade is not achieved may still gain access via an entry interview and skills test.

Learning Style

Students learn via the classroom to develop the underpinning knowledge and skills required to complete task sheets that test understanding.  Practical demonstrations and experiments are also integral to the programme.

Equipment Requirements

Usual stationary and a scientific calculator

Assessment

The course is based on continual assessment, assignments being completed by the student throughout the course.  Students are supported throughout the assessment process to help them achieve the different grading levels of either pass, merit or distinction.

Progression

On satisfactory completion of the programme, most students will progress onto the 2nd year of new BTEC National Diploma in either Mechanical or Electrical Engineering where they will study further engineering units or specific work related units such as pneumatics, hydraulics, 3 phase motors and drives.  The BTEC programme can offer a wide range of possible units depending on the demand and requirements of employers and students.

Additional Information

If you are unsure about your entry qualifications and suitablity for the course you can contact the college to speak to a member of staff who will be pleased to offer advice based on our experience of running a wide range of BTEC programmes from 1st Certificate to HNC courses across different engineering disiplines.

Enrolment Instructions

Contact the college using the on line enrolment process or call into student services situated at the front of the college in St Mary Street

Related Tags

About the Course

The course is a 54 Credit qualification comprising of a number of units each worth 9 credits. To complete the programme the learner  will need to pass two mandatory units, one principle related to their workplace or discipline. This is followed by three further units; one of which is a specialist unit and the remaining two are related to the chosen pathway.

Course Content

This is a two year programme:

Mandatory Units Engineering health and safety (9 credits) Engineering principles (9 credits)

Participle Unit from Welding, Fabrication, Maintenance and Machining?Followed by one specialist and two pathway units in plate-work, sheet-work, pattern development, Metal Arc, MIG and TIG welding

Entry Requirements

It would normally be required that the learner has successfully completed a level 2 engineering programme in fabrication and welding. It would also be expected that the student is working in the fabrication and welding industry. This qualification is not suitable for people trying to gain entry into the industry and who do not have the relevant skills and qualifications.

Learning Style

Whilst this is a very practical programme with ample opportunity to develop appropriate welding skills, this is a technical qualification which may at times demand a classroom approach to deliver the technical element of the course.

Equipment Requirements

All materials, welding and fabrication equipment will be provided, however students provide their own suitable safety footwear and overalls.

Assessment

Assessment is via practical observation by the tutor and written assignment work.  Tutors are very helpful and supportive in helping student develop the right skills to meet course requirements.

Progression

While there is no obvious progression, students may wish to consider the BTEC / HNC route for technical, supervisory positions.

Enrolment Instructions

Students can enrol on line or call in and make an appointment to speak to the tutor in person.

Related Tags

About the Course

This Mechanical Principles unit which is offered at level 3 is taken from the BTEC Engineering qualification. This Level 3 unit is comparable with A Level Physics but focuses more directly on what engineers may find relevant to their work place. The unit is ideally suited to those who may wish to progress on to the HNC diploma qualification in Electrical or Mechanical Engineering starting in Sept 13.

The unit will be offered starting in April 13 on a Thursday evening 6 to 9pm and will run for sixteen weeks finishing in June 13. Learners who successfully complete this unit may wish to continue to study a further unit in engineering mathematics. The combination of mathematics and a Principles unit is ideal preparation for those learners considering starting a HNC diploma programme who may not have the appropriate entry qualifications.

Course Content

On completion of this unit a learner should:

1 Be able to determine the effects of loading in static engineering systems

2 Be able to determine work, power and energy transfer in dynamic engineering systems

3 Be able to determine the parameters of fluid systems

4 Be able to determine the effects of energy transfer in thermodynamic systems.

Success Story

This is the first time that individual units have been offered in this way. It has become very evidence that a number of people working in the field of engineering wanting to develop their career by completing a HNC Diploma programme may feel inhibited because they do not possess the requisite entry qualifications. Suitable candidates may have been away from formal education f some time

Entry Requirements

Candidates would be expected to have at least a Grade C in GCSE mathematics however this should not be a bar to learners who can demonstrate they have the right mind set and approach to be successful

Learning Style

Formal lectures, worked examples, test and assignments. You can expect a supportive environment where you will develop the skills and knowledge necessary to be successful on this course.

Equipment Requirements

Stationery including a CASIO scientific calculator.

Assessment

Regular written assessments throughout the course

Progression

On successfully completion of a Principle unit combined with the Mathematics units, learners may progress onto the HNC Diploma. 

Additional Information

You can speak to the tutor informally to seek further information, advice and guidance.

Enrolment Instructions

You can enrol on line

Related Tags

About the Course

New HNC Diploma in General Engineering delivered over one afternoon/evening per week. 2 to 9 pm.

BTEC Higher Nationals (HNs) provide a programme of specialist vocational learning at Levels 4 and 5, which reflects the requirements of professional organisations and meet the National Occupational Standards for each sector or industry

Course Content

This course will meet the requirement for the HNC Diploma offered at level 4. The course will cover core units in mathematics, engineering science and the engineering project. This general engineering course will also provide coverage of both electrical and mechanical units such as pneumatics, hydraulics and electrical power making this course and ideal stepping stone to further studies such as HND diploma, foundation degrees or Honours degrees.

Success Story

While the Part Time afternoon/evening HNC is a new development, City College has been delivering part time and full time HNC engineering programmes for many years. Students who are employed and those seeking employment within the industry have all benefitted from completing the HNC Engineering diploma programmes.

Entry Requirements

All candidates must have completed a suitable level 3 programme of study and should have as a minimum, A-Level mathematics and Physics or BTEC National diploma in Engineering at level 3. If you are unsure if you possess the required entry qualifications, then please contact us for an informal discussion where we can discuss the entry requirements in more detail. For those who do not possess the appropriate entry qualifications we have a range of level 3 programmes designed to ensure students have the appropriate skills to start a L4 HNC Diploma programme in Engineering.

Learning Style

The course will be delivered between the hours of 2 and 9pm broken down in to 2or 3 sessions. This course is specially designed for those who may find if difficult to attend on a day release basis.

The main method of teaching in classroom based lectures but broken down where ever possible broken down into tasks and problem solving undertaken in groups or as individuals. Tutors adopt and encourage a student centered approach with question and answer sessions and tutorials designed to underpin the learning with its application in real life problems.

Equipment Requirements

As the course is mainly classroom based, stationery, scientific calculator etc is essential.

A course hand book will detail suggested reading material.

Assessment

over the two years of the programme. Once enrolled on the course students can use college facilities any time during opening hours.

Some subjects such as mathematics and science will use class based tests but there are no end of year exams.

Year 1 will consist of further mathematics and a revision of mechanical and electrical principles at level 3 in term 1. Terms 2 and 3 will cover the units for health & safety, mathematics and engineering principles at level 4.

Year 2 will consist of hydraulics, pneumatics and electrical power in term 1. Terms 2 & 3 will focus on the engineering project. Where possible learners will be encouraged to select a work based project related to their employment. This may mean that during these two terms attendance timings may change to allow the student to complete tasks at It may be possible for students to work collaboratively where complementary projects can be chosen.

Progression

On successful completion, students may progress on to the HND Diploma, foundation degree or honours degree offered by other HE institutions.

Additional Information

City college recently launched a very successful assess to HE engineering programme entitled BTEC Certificate in Engineering which provides coverage of the key foundation units at L3 in Mathematics and engineering principles

Enrolment Instructions

Enrollment on to the course will be via the on-line application process. All applicants will be asked to attend an informal interview where some evidence of previous qualifications will be required.

Related Tags

About the Course

This course is designed for technical students who have achieved the Diploma in Mechanical Engineering (Merit Merit grade) or equivalent and wish to progress into Higher Education. It equates to the first Year of a Degree programme.

Mature learners who have also copmpleted the Certificate in Engineering course and the Subsidiary Diploma in Engineering will be considered for entry to the HNC programme.

Course Content

The BTEC (Edexcel) HNC Diploma is an 8-unit qualification of which there are 3 core units.  The newly introduced flexibility at this level allows for and credits a period of revision at level 3, prior to undertaking the level 4 or 5 units. The main units undertaken in the first year are; Analytical Methods, Engineering Science, Health and Safety, followed by The Business Management Techniques unit. 

The 2nd year will consist of group project plus two path way units in one of the following areas: Manufacturing, Light Current (Electronic) or Heavy Current (Utilisation of Electrical Energy and Power)

Entry Requirements

Minimum 160 UCAS points, including GCSE English and Maths at grade B or Functional Skills in English and Maths at Level 2. Adult learners who have not been in education recently can gain entry via interview and demonstration of relevant work experience and or equivalent qualifications. Individual cases where the minimum grade is not achieved may still gain access via an entry interview and skills test.

Learning Style

A range of learning facilities both formal and informal are available, together with a VLE (virtual learning environment) system allowing students to access course work and assignments from home. 

Equipment Requirements

Scientific calculator, Stationary

Assessment

Assessment criteria are matched to a series of assignments and time constrained tests issued throughout the year. These include and encourage the opportunity for higher grade achievement. 

Progression

On sucessful completion, students may progress  on to the HND Diploma.

Additional Information

Candidates may be eligible to apply for funding from Student Finance Direct.  Please take the time to read the information outlining what you can apply for - generally Tuition Fees and a Maintenance Grant.  Application are made online use attached link:  www.studentfinance.direct.gov.uk

For full information on these new qualifications please visit the Edexcel website 

HE Handbook

Enrolment Instructions

For existing students no interview is required to enrol onto this course. Any new students will need an interview.  Please apply online or in person and the Information and Advice team will book an interview with the Course Leader to speak about the course and suitability.  You can also telephone the Information and Advice Team on (023) 8048 4848.

Related Tags

About the Course

The HND Diploma at level 5 is a follow on qualification from the HNC Diploma at level 4. It is what is called a nested qualification in that credits obtained at level 4 are also used to achieve the level 5 qualification. The HNC Diploma requires 120 credits while the HND Diploma requires a further 120 credits, 240 credits in total.

The HND Diploma builds on the more technical, academic HNC programme. The HND Diploma is more about the application of principles evidenced through more worked related units.

Course Content

Mechanical Principles, Research Project, Personal and Professional Development and Quality Control and Management all at level 5

Success Story

Students who may have completed the older version of the HNC programme can access this programme to achieve a level 5 HND Diploma.

Entry Requirements

A HNC qualification achieved under the NCF banner, 10 units or a HNC Diploma 120 credit qualification achieved under new QCF banner.

Learning Style

The first term will be delivered in college on a day release basis for specific taught units such as Mechanical Principles. The 2nd and 3rd term will allow students to complete units in the workplace but with regular contact and vists form tutors.

Equipment Requirements

Access to a computer and the Internet is highly desirable to gain maximum use of the virtual learning environment provided by the college.

Assessment

Tutor designed assignments, presentations and reports.

Enrolment Instructions

Please apply on line or in person at the college if you need to speak to a tutor regarding suitability.

Related Tags